Search

Mould Attack

Updated: Jul 19


The family of a newly-immigrant and University of Manitoba student, Roan (not her real name), recently moved out of their rented apartment because of various health complications due to moulds. They reported the issue to the landlord, but their request to remediate the dwelling unit was ignored and they were only told to use a humidifier. After 2 years of battling diarrhea, colds flu and skin diseases, they finally decided to move out of the mould-laden apartment by purchasing a home last May 2016.


Moulds are part of the natural outdoor environment as it breaks down dead organic matter, such as fallen leaves and dead trees. However, mould growth should be prevented in indoor environment. Moulds reproduce by means of microscopic spores that float through outdoor and indoor air. Mould may instigate growing indoors when these spores land on wet surfaces such as wooden window jambs, ceilings, and walls. Moulds only grow in the presence of water or moisture. If the wet areas are dried within 24 to 48 hours after a leak or spill, in most cases, mould will not cultivate.


Just like what Roan’s family has experienced, moulds have the potential to cause health problems because it produces allergens, irritants, and mycotoxins. Physical contact with mould may cause allergic reactions in sensitive individuals, whose allergic responses may include sneezing, runny nose, red eyes, and dermatitis. Moulds can also trigger asthma attacks and can irritate the eyes, skin, nose, throat, and lungs of both mould-allergic and non-allergic people. Dead mould may still cause allergic reactions in some people, therefore it is not sufficient to just kill the mould; it must also be removed completely.


You may be suspicious of hidden moulds if your home smells mouldy but you cannot see the source, or if there was a recent water damage. Moulds may be concealed in locations such as the underside of carpets and pads, the backside of drywalls, the top-side of ceiling tiles, inside walls around leaking or condensing pipes, the surface of walls behind furniture, inside ductwork, and in roof materials above ceiling tiles.


Mould and Moisture Prevention and Control Tips


• Quickly dry wet spots as soon as water leaks occur or moisture collects on windows, walls, or pipes.

• Keep indoor humidity between 30% to 50%. Relative humidity can be measured with a hygrometer, which can be purchased for $25-50 at most stores.

• Check if the ground slopes away from the foundation walls.

• Clean roof gutters and downspouts regularly.

• Vent clothes dryer and gas-fired hot water tanks and furnaces to the outdoors.

• Use air conditioners and/or de-humidifiers when needed.

• Turn on the exhaust fans or open the window when showering or cooking.

• Increase air movement by fans or opening doors and/or windows, when practical.

• Insulate cold water pipes with proper insulation.

• Increase air temperature.


Inspecting hidden mould problems may be challenging and will require attention when it involves disturbing potential sites of mould growth. If you suspect that you may have a hidden mould problem, consider hiring an experienced mould remediation professional.


Republished from: “Mould Attack”, Green Building, Pilipino Express.


#climatechange #greenbuilding #homeinspection #energyefficiency #climatereality #upsilonclimateactionnetwork #canada #philippines

1 view0 comments